Reference Guide

8|
Aruba 600 Series Controllers FIPS 140-2 Level 2 Security Policy
Figure2‐Aruba620MobilityControllerRearView
The Aruba 620 is equipped with a media eject button, which allows users to eject storage devices safely
and place the system in standby. Pushing the media eject button changes the state of the Aruba 620; the
table below describes the states and LED behaviors associated with use of the media eject button:

Table1:MediaEjectButtonLEDBehavior
Initial State LED State Action Status LED Function
LED Action
Completed
NAS Media Operational Green-solid
Press and hold
media eject button
for 1 to 5 seconds
only
Amber-flashing
Un-mount all NAS
media
Amber-solid
NAS Media Unmounted Amber-solid
Press and hold
media eject button
for 1 to 5 seconds
only
Amber-flashing
Mount all attached
NAS devices, and
return to fully
functional
operation
Green-solid
Operational Green-solid
Press and hold
media eject button
for more than 5
seconds only
Red-flashing
Controller goes
into Standby
Red-solid
10/100/1000Base-T
Gigabit Ethernet Port
10/100Base-T
Ethernet Ports
USB port
Media Eject Button
Serial Console Port
AC Power Socket