Reference Guide

Aruba 3000, 6000/M3 Mobility Controller FIPS 140-2 Level 2 Security Policy|31
Required TEL Locations
The Aruba 6000-400 controller chassis requires a minimum of 11 TELs to be applied as follows:
Figure4‐RequiredTELsfortheAruba6000ControllerChassis
To Detect Opening the Chassis Cover
1. Spanning the left side and rear of the chassis
2. Spanning the right side and rear of the chassis
To Detect the Removal of Any Module or Cover Plate
3. Spanning the Slot 2 faceplate or blank and the top of the chassis
4. Spanning the Slot 3 faceplate or blank and the top of the chassis
5. Spanning the Slot 0 faceplate or blank and the Slot 2 faceplate or blank
6. Spanning the Slot 1 faceplate or blank and the Slot 3 faceplate or blank
7. Spanning the fan tray faceplate and the bottom of the chassis
8. Spanning the PS1 handle (or blank faceplate) and the bottom of the chassis
9. Spanning the PS2 handle (or blank faceplate) and the bottom of the chassis
10. Spanning the PS3 handle (or blank faceplate) and the bottom of the chassis
To Detect Access to Restricted Ports
11. Spanning the Serial port on the M3
The Aruba 3000 series Controller require a minimum of 3 TELs to be applied as follows:
Figure5‐RequiredTELsfortheAruba3000‐seriesController
To Detect Access to Restricted Port
1. Spanning the Serial port