Reference Guide

3.2.7 Inspection/Testing of Physical Security Mechanisms

Table 7 - Inspection/Testing of Physical Security Mechanisms

Physical Security Mechanism Recommended Test Frequency Guidance

Tamper-evident labels (TELs) Once per month Examine for any sign of removal,

replacement, tearing, etc. See

images above for locations of

TELs

Opaque module enclosure Once per month Examine module enclosure for

any evidence of new openings or

other access to the module

internals.

3.3 Operational Environment

This section does not apply as the operational environment is non-modifiable.

3.4 Logical Interfaces

The physical interfaces are divided into logical interfaces defined by FIPS 140-2 as described in the

following table.

Table 8 - Logical Interfaces

FIPS 140-2 Logical Interface Module Physical Interface

Data Input Interface



10/100/1000 Ethernet Ports

 802.11a/b/g/n/ac Antenna Interfaces

 USB 2.0 port

Data Output Interface



10/100/1000 Ethernet Ports

 802.11a/b/g/n/ac Antenna Interfaces