Reference Guide

20
Figure 10 - Aruba AP-93 TEL placement top view
3.2.4 AP-104 TEL Placement
This section displays all the TEL locations of the Aruba AP-104. The AP-104 requires a minimum of 3
TELs to be applied as follows:
3.2.4.1 To detect opening of the chassis cover:
1. Spanning the bottom and top chassis covers on the left side
2. Spanning the bottom and top chassis covers on the right side
3.2.4.2 To detect access to restricted ports:
3. Spanning the serial port
Following is the TEL placement for the AP-104:
Figure 11 - Aruba AP-104 TEL placement front view
Figure 12 - Aruba AP-104 TEL placement left view