Reference Guide

14
Label LED
Position
Function Action Status
PWR D11 AP power / system status Off No power to AP
Red System Alarm
Flashing - Green Power did not connect
well or equipment failure
On - Green Device ready
ENET0 D15 Ethernet Network Link
Status / Activity
Off Ethernet link unavailable
On - Yellow 10/100Mbs Ethernet link
negotiated
On - Green 1000Mbs Ethernet link
negotiated
Flashing Ethernet link activity
WLAN0 D6 Radio0 Status Off Radio0 disabled
On - Orange Radio0 enabled
WLAN1 D1 Radio1 Status Off Radio1 disabled
On - Blue Radio1 enabled
SS1 D7/D2 Signal Strength
(Radio0/Radio1) least
significant bit
On - Orange/Blue
(For Radio0: Orange and
For Radio1: Blue)
Off
SS1 to SS4 LEDs turn
on/off depending on the
signal strength of the
current radio neighbors.
Stronger the signal, more
LEDs get lit starting with
SS1 (least signal strength
indicator) all the way to
SS4 (highest signal
strength indicator).
SS2 D8/D3 Signal Strength
(Radio0/Radio1) second
most significant bit
SS3 D9/D4 Signal Strength
(Radio0/Radio1) least
significant bit
SS4 D10/D5 Signal Strength
(Radio0/Radio1) most
significant bit