Reference Guide

10
 FIPS Kit
o 4010061-01 (Part number for Tamper Evident Labels)
The exact firmware version validated was:
 ArubaOS 6.3.1.7-FIPS
2.3.1.1 Dimensions/Weight
The AP has the following physical dimensions:
 132 mm x 135 mm x 45 mm (5.2" x 5.3" x 1.8")
 0.3 kg (10.56 oz)
2.3.1.2 Interfaces
The module provides the following network interfaces:
 1 x 10/100/1000 Base-T Ethernet (RJ45) Ports
 802.11a/b/g/n Antenna (External)
o 4x RP-SMA antenna interfaces (supports up to 2x2 MIMO with spatial diversity)
 1 x RJ-45 console interface (disabled in FIPS mode by TEL)
The module provides the following power interfaces:
 48V DC via Power-over-Ethernet (POE)
 12V DC power supply
2.3.1.3 Indicator LEDs
There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 3 - AP-104 Indicator LEDs
Label Function Action Status
PWR AP power / ready status Off No power to AP
Red Initial power-up condition
Flashing – Green Device booting, not ready
On – Green Device ready
ENET Ethernet Network Link
Status / Activity
Off Ethernet link unavailable
On – Amber 10/100Mbs Ethernet link negotiated
On – Green 1000Mbs Ethernet link negotiated
Flashing Ethernet link activity
11b/g/n 2.4GHz Radio Status Off 2.4GHz radio disabled
On – Amber 2.4GHz radio enabled in WLAN mode
On – Green 2.4GHz radio enabled in 802.11n mode