Reference Guide

8
conjunction with Aruba Mobility Controllers to deliver high-speed, secure user-centric network services in
education, enterprise, finance, government, healthcare, and retail applications.
2.2.1 Physical Description
The Aruba AP-92 Access Point is a multi-chip standalone cryptographic module consisting of hardware
and software, all contained in a hard plastic case. The module contains an 802.11 a/b/g/n transceiver and 2
integrated omni-directional multi-band dipole antenna elements (supporting up to 2x2 MIMO with spatial
diversity).
The plastic case physically encloses the complete set of hardware and software components and represents
the cryptographic boundary of the module.
The Access Point configuration validated during the cryptographic module testing included:
 AP-93-F1
 FIPS Kit
o 4010061-01 (Part number for Tamper Evident Labels)
The exact firmware version validated was:
 ArubaOS 6.3.1.7-FIPS
2.2.1.1 Dimensions/Weight
The AP has the following physical dimensions:
 120 mm x 130 mm x 35 mm (4.7" x 5.1" x 1.4")
 255 g (9 oz)
2.2.1.2 Interfaces
The module provides the following network interfaces:
 1 x 10/100/1000 Base-T Ethernet (RJ45) Ports
 802.11a/b/g/n Antenna Interfaces (Internal)
 1 x RJ-45 console interface (disabled in FIPS mode by TEL)
The module provides the following power interfaces:
 48V DC via Power-over-Ethernet (POE)
 12V DC power supply
2.2.1.3 Indicator LEDs
There are 5 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 2 - AP-93 Indicator LEDs
Label Function Action Status
PWR AP power / ready status Off No power to AP
Red Initial power-up condition