Users Guide

889 | show aaa state configuration Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
fast age When the fast age feature allows the controller actively sends probe
packets to all users with the same MAC address but different IP
addresses. The users that fail to respond are purged from the
system. This parameter shows if fast aging of user table entries has
been enabled or disabled.
Per-User Log
Shows if a W-6000, W-3600 or W-7200 Series controller collects per-
user log files for debugging.
NOTE: This option is enabled using the aaa log command.
Bandwidth contracts Number of configured bandwidth contracts on the controller.
IP takeovers Number of times a two different stations have attempted to use the
same IP address (IP spoofing).
Ping/SYN/Session attacks Number of reported ping, SYN and session attacks.
Command History
Release Modification
ArubaOS 3.0 Command introduced.
ArubaOS 6.3 The per-user log field was added to the output of this command
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or
local controllers