Users Guide

83 | aaa authentication via connection-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Default
tunnel address <address>
A list of network
destination (IP address
and netmask) that the VIA
client will tunnel through
the controller. All other
network destinations will
be reachable directly by
the VIA client. Enter
tunneled IP address and
its netmask.
—
address <address>
—
netmask <netmask>
—
user-idle-timeout
The user idle timeout for
this profile. Specify the
idle timeout value for the
client in seconds. Valid
range is 30-15300 in
multiples of 30 seconds.
Enabling this option
overrides the global
settings configured in the
AAA timers. If this is
disabled, the global
settings are used.
disabled
validate-server-cert
Enable or disable VIA
from validating the server
certificate presented by
the controller.
Enabled
whitelist addr
Specify a hostname or IP
address and network mask
to define a whitelist of users
allowed to access the net-
workif the allow-whitelist-
traffic option is enabled
—
addr <addr>
Host name of IPaddress of
a client
—
netmask <netmask>
Netmask, in dotted decimal
format
—
description <description>
(Optional) description of the
client
—
windows-credentials
Enable or disable the use
of the Windows
credentials to login to VIA.
If enabled, the SSO
(Single Sign-on) feature
can be utilized by remote
users to connect to
internal resources.
Enabled
Usage Guidelines
Issue this command to create a VIA connection profile. A VIA connection profile contains settings required by
VIA to establish a secure connection to the controller. You can configure multiple VIA connection profiles. A VIA