Users Guide

Parameter Description
VIA Logon Script Name of the logon script that must be executed after VIA establishes a
secure connection. The logon script must reside in the client computer.
VIA Logoff Script Name of the log-off script that must be executed after the VIA connection is
disconnected. The logoff script must reside in the client computer.
VIA Support E-mail
Address
The support e-mail address to which VIA users will send client logs.
Default: None.
Maximum reconnection
attempts
The maximum number of re-connection attempts by the VIA client due to
authentication failures.
Default: 3
VIA external download
URL
End users will use this URL to download VIA on their computers.
Allow user to disconnect
VIA
Enable or disable users to disconnect their VIA sessions.
Default: Enabled
Comma Separated List of
HTTP Ports
Traffic from the specified ports will be verified by the content security service
provider.
Keep VIA window
minimized
Enable this option to minimize the VIA client to system tray during the
connection phase. Applicable to VIA client installed in computers running
Microsoft Windows operating system.
Block traffic until VPN
tunnel is up
If enabled, this feature will block network access until the VIA VPN connection
is established.
Block traffic rules Specify a hostname or IP address and network mask to define a whitelist of
users to which the Block traffic until VPN tunnel is up setting will not
apply.
Related Commands
Command Description Mode
aaa authentication via connection-profile
Use aaa authentication via
connection-profile to configure
the parameters displayed in
the output of this show
command.
Config mode
Command History
This command was introduced in ArubaOS 5.0.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show aaa authentication via connection-profile | 828