Users Guide

8 | The ArubaOS Command-Line Interface Dell Networking W-Series ArubaOS 6.4.x| User Guide
Command Description
l EIRP
l Flag
l Active Media Sessions
Additionally, the all parameter is introduced.
show ap wired stats
This command now displays results for both campus and Remote
access points.
show cp-bwcontracts The CP bw contracts table now lists the traffic rate in
packets/second instead of bits/second.
show datapath The following changes were introduced:
l The compression parameter displays datapath compression
statistics. By default, the combined statistics for all CPUs are
shown.
l The output of the show datapath session command now
supports the r flag,which indicates that the session was routed
through a nexthop device defined by a nexthop-list. For more
information, see ip nexthop-list.
l The output of the show datapath cp-bwm command now
displays the rate in pps.
show ip ospf The tunnel ID limit is changed from 2147483647 to 16777215.
show interface vlan The DHCP Option-82 AP name and ESSID are configured on this
Interface parameter is introduced.
show port stats The PC # (port-channel) value is introduced under the Port column.
show port status Following values are introduced:
l The PC# (port-channel) value is introduced under the PortMode
column.
l The PC (port-channel) value is introduced under the PortType
column.
l Speed and Duplex columns are introduced.
show spantree The BpduGuard field is introduced as part of this command output.
show ucc call-info cdrs The UCC-Band, MOS, and MOS-Band fields are introduced as part of
the show ucc call-info cdrs command output.
Following changes are made as part of the show ucc call-info cdrs
cid <cid> command output:
l Moved the UCC Score, Client Health, MOS parameters from the
CDR-Basic section to the Call Samples section heading.
l Added a new Call Sample(per 60 secs) section heading. This
section displays the properties of media session like IP, port,