Users Guide

771 | rf dot11g-radio-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
radio-enable
Enables or disables radio
configuration.
— enabled
slb-mode channel|radio
SLB Mode allows control over
how to balance clients. Select one
of the following options:
l channel: Channel-based load-
balancing balances clients
across channels. This is the
default load-balancing mode
l radio: Radio-based load-
balancing balances clients
across APs
channel
slb-threshold
If the spectrum load balancing
feature is enabled, this
parameter controls the
percentage difference between
number of clients on a channel
channel that triggers load
balancing. The default value is
20%, meaning that spectrum load
balancing is activated when there
are 20% more clients on one
channel than on another channel
used by the AP radio.
1-100% 20%
slb-update-interval <secs>
Specify how often spectrum load
balancing calculations are made
(in seconds). The default value is
30 seconds.
1-
214748364
7 seconds
30
seconds
spectrum-load-bal-domain
Define a spectrum load balancing
domain to manually create RF
neighborhoods.
Use this option to create RF
neighborhood information for
networks that have disabled
Adaptive Radio Management
(ARM) scanning and channel
assignment.
l If spectrum load balancing is
enabled in a 802.11g radio
profile but the spectrum load
balancing domain is not
defined, ArubaOS uses the
ARM feature to calculate RF
neighborhoods.
l If spectrum load balancing is
enabled in a 802.11g radio
profile and a spectrum load
balancing domain isalso
defined, AP radios belonging
to the same spectrum load
balancing domain will be
— —