Users Guide

Parameter Description Range Default
Note that if you configure a value
above the supported maximum,
the maximum supported value
will be used instead. Values below
600m will use default settings.
mgmt-frame-throttle-
interval
Averaging interval for rate
limiting management frames in
seconds. Zero disables rate
limiting.
Note: This parameter only applies
to AUTH and ASSOC/RE-ASSOC
management frames.
0-60 1 second
interval
mgmt-frame-throttle-limit
Maximum number of
management frames allowed in
each throttle interval.
NOTE: This parameter only applies
to AUTH and ASSOC/RE-ASSOC
management frames.
0-999999 20 frames
per
interval
mode
One of the operating modes for
the AP.
ap-mode
ap-mode
Device provides transparent,
secure, high-speed data
communications between
wireless network devices and the
wired LAN.
am-mode
Device behaves as an air monitor
to collect statistics, monitor
traffic, detect intrusions, enforce
security policies, balance traffic
load, self-heal coverage gaps,
etc.
spectrum-mode
Device operates as an spectrum
monitor, and can send spectrum
analysis data to a desktop or
laptop client.
For a list of APs that can be
converted into a spectrum
monitor or hybrid AP, refer to the
Spectrum Analysis chapter of the
Dell Networking W-Dell
Networking W-Series ArubaOS
6.4.x User Guide.
no
Negates any configured
parameter.
— —
Dell Networking W-Series ArubaOS 6.4.x | User Guide rf dot11g-radio-profile | 770