Users Guide

Parameter Description Range Default
disable-arm-wids-function
Disables Adaptive Radio
Management (ARM) and Wireless
IDS functions. These can be
disabled if a small increase in
packet processing performance
is desired. If a radio is configured
to operate in Air Monitor mode,
then these functions are always
enabled irrespective of this
option. CAUTION: Use carefully,
since this effectively disables
ARM and WIDS
1-16 4
dot11b-protection
Enable or disable protection for
802.11b clients. This parameter is
enabled by default. Disabling this
feature may improve
performance if there are no
802.11b clients on the WLAN.
WARNING: Disabling protection
violates the 802.11 standard and
may cause interoperability
issues. If this feature is disabled
on a WLAN with 802.11b clients,
the 802.11b clients will not detect
an 802.11g client talking and can
potentially transmit at the same
time, thus garbling both frames.
— enabled
dot11h
Enable advertisement of 802.11d
(Country Information) and
802.11h (TPC or Transmit Power
Control) capabilities This
parameter is disabled by default.
— disabled
high-throughput-enable
Enables high-throughput
(802.11n) features on a radio
using the 2.4 GHz frequency
band.
— enabled
ht-radio-profile
Name of high-throughput radio
profile to use for configuring
high-throughput support on the 5
GHz frequency band. See rf ht-
radio-profile on page 779.
— “default-a”
Dell Networking W-Series ArubaOS 6.4.x | User Guide rf dot11g-radio-profile | 768