Users Guide

Parameter Description Range Default
Clients must support CSA in order
to track the channel change
without experiencing disruption.
csa-count
Number of CSA announcements
that are sent before the AP
begins transmitting on the new
channel.
1-16 4
channel
Channel number for the AP
802.11g/802.11n physical layer.
The available channels depend
on the regulatory domain
(country). Channel number
configuration options for 20 MHz
and 40 MHz modes:
l num: Entering a channel
number disables 40 MHz
mode and activates 20 MHz
mode for the entered channel.
l num+: Entering a channel
number with a plus (+) sign
selects a primary and
secondary channel for
40 MHz mode. The number
entered becomes the primary
channel and the secondary
channel is determined by
increasing the primary
channel number by 4.
Example: 157+ represents
157 as the primary channel
and 161 as the secondary
channel.
l num-: Entering a channel
number with a minus (-) sign
selects a primary and
secondary channel for
40 MHz mode. The number
entered becomes the primary
channel and the secondary
channel is determined by
decreasing the primary
channel number by 4.
Example: 157- represents 157
as the primary channel and
153 as the secondary channel.
NOTE: 20 MHz clients are allowed
to associate when a primary and
secondary channel are configured;
however, the client will only use the
primary channel.
Depends
on
regulatory
domain
—
Dell Networking W-Series ArubaOS 6.4.x | User Guide rf dot11g-radio-profile | 766