Users Guide

765 | rf dot11g-radio-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
that it cannot hear.
channel
Channel number for the AP
802.11g/802.11n.802.11ac
physical layer. The available
channels depend on the
regulatory domain (country).
Channel number configuration
options for 20 MHz, 40 MHz, and
80 Mhz modes:
l num: Entering a channel
number disables 40 MHz
mode and activates 20 MHz
mode for the entered channel.
l num+: Entering a channel
number with a plus (+) sign
selects a primary and
secondary channel for
40 MHz and 80 Mhz modes.
The number entered becomes
the primary channel and the
secondary channel is
determined by increasing the
primary channel number by 4.
Example: 157+ represents
157 as the primary channel
and 161 as the secondary
channel.
l num-: Entering a channel
number with a minus (-) sign
selects a primary and
secondary channel for
40 MHz and 80 Mhz modes.
The number entered becomes
the primary channel and the
secondary channel is
determined by decreasing the
primary channel number by 4.
Example: 157- represents 157
as the primary channel and
153 as the secondary channel.
NOTE: 20 MHz clients are allowed
to associate when a primary and
secondary channel are configured;
however, the client will only use the
primary channel.
Depends
on
regulatory
domain
—
clone
Name of an existing radio profile
from which parameter values are
copied.
— —
csa
Channel Switch Announcement
(CSA), as defined by IEEE
802.11h, allows an AP to
announce that it is switching to a
new channel before it begins
transmitting on that channel.
— disabled