Users Guide

Parameter Description Range Default
spectrum-mode
Device operates as an spectrum monitor,
and can send spectrum analysis data to a
desktop or laptop client.
For a list of APs that can be converted into
a spectrum monitor or hybrid AP, refer to
the Spectrum Analysis chapter of the Dell
Networking W-Dell Networking W-Series
ArubaOS 6.4.x User Guide.
— —
no
Negates any configured parameter. — —
radio-enable
Enables or disables radio configuration. — enabled
slb-mode channel|radio
SLB Mode allows control over how to
balance clients. Select one of the following
options
l channel: Channel-based load-
balancing balances clients across
channels. This is the default load-
balancing mode
l radio: Radio-based load-balancing
balances clients across APs
channel
slb-update-interval
<secs>
Specify how often spectrum load
balancing calculations are made (in
seconds). The default value is 30 seconds.
1-
214748364
7 seconds
30
seconds
spectrum-load-bal
-domain
Define a spectrum load balancing domain
to manually create RF neighborhoods.
Use this option to create RF neighborhood
information for networks that have
disabled Adaptive Radio Management
(ARM) scanning and channel assignment.
l If spectrum load balancing is enabled
in a 802.11a radio profile but the
spectrum load balancing domain is not
defined, ArubaOS uses the ARM
feature to calculate RF neighborhoods.
l If spectrum load balancing is enabled
in a 802.11a radio profile and a
spectrum load balancing domain isalso
defined, AP radios belonging to the
same spectrum load balancing domain
will be considered part of the same RF
neighborhood for load balancing, and
will not recognize RF neighborhoods
defined by the ARM feature.
— —
Dell Networking W-Series ArubaOS 6.4.x | User Guide rf dot11a-radio-profile | 758