Users Guide

Example
The following command configures VoIP-aware scanning for the arm-profile named “voice-arm:”
(config) (host) #rf arm-profile voice-arm
voip-aware-scan
Command History
Release Modification
ArubaOS 3.0 Command introduced.
ArubaOS 3.3.
Support for the high-throughput IEEE 802.11n standard was introduced.
ArubaOS 3.3.2
Support for the wait-time parameter was removed.
ArubaOS 3.4.1
The voip-aware-scan parameter no longer requires a license, and is
available in the base OS.
ArubaOS 6.1
The ps-aware-scan parameter is now disabled by default.
ArubaOS 6.3
The noise-wait-time, and noise-threshold parameters were deprecated,
and the following parameters were introduced.
l 80MHz support
l aggressive-scanning
l client-match
l channel-quality-aware
l channel-quality-threshold
l channel-quality-wait-time
l cm-lb-client-thresh
l cm-lb-snr-thresh
l cm-lb-thresh
l cm-max-steer-fails
l cm-report-interval
l cm-stale-age
l cm-sticky-check-interval
l cm-sticky-min-signal
l cm-sticky-snr
l cm-sticky-snr-delta
l cm-update-interval
l cm-unst-ageout-interval
ArubaOS 6.3.1.0 The cellular-handoff-assist parameter was introduced.
Dell Networking W-Series ArubaOS 6.4.x | User Guide rf arm-profile | 750