Users Guide

747 | rf arm-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
ps-aware-scan
When enabled, the AP will not scan if
Power Save is active.
— disabled
rogue-ap-aware
When enabled, the AP will try to
contain off-channel rogue APs.
— disabled
scan-interval
If scanning is enabled, the scan
interval defines how often the AP will
leave its current channel to scan
other channels in the band. Off-
channel scanning can impact client
performance. Typically, the shorter
the scan interval, the higher the
impact on performance. If you are
deploying a large number of new APs
on the network, you may want to
lower the Scan Interval to help those
APs find their optimal settings more
quickly. Raise the Scan Interval back
to its default setting after the APs are
functioning as desired.
Recommended Values: 0-30
seconds
0-2,147,483,
647 seconds
10 seconds
scan-mode
Select the scan mode for the AP:
l all-reg-domain: The AP scans
channels within all regulatory
domains. This is the default
setting.
l reg-domain:Limit the AP scans to
just the regulatory domain for that
AP.
— all-reg-
domain
scanning
The Scanning checkbox enables or
disables AP scanning across multiple
channels. Disabling this option also
disables the following scanning
features:
l Multi Band Scan
l Rogue AP Aware
l Voip Aware Scan
l Power Save Scan
Do not disable Scanning unless you
want to disable ARM and manually
configure AP channel and
transmission power.
— enabled