Users Guide

745 | rf arm-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
error-rate-
threshold
The percentage of errors in the
channel that triggers a channel
change. Recommended value is 50%.
A value of 0% disables this feature.
0-100 50%
error-rate-wait
-time
Time, in seconds, that the error rate
has to be at least the error rate
threshold to trigger a channel
change.
1-
2,147,483,647
Recommende
d Values: 1-
100
30 seconds
free-channel-
index
The difference in the interference
index between the new channel and
current channel must exceed this
value for the AP to move to a new
channel. The higher this value, the
lower the chance an AP will move to
the new channel. Recommended
value is 25.
10-40 25
ideal-coverage-
index
The coverage that the AP should try
to achieve on its channel. The denser
the AP deployment, the lower this
value should be. Recommended value
is 10.
2-20 10
load-aware-scan-threshold
Load aware ARM preserves network
resources during periods of high
traffic by temporarily halting ARM
scanning if the load for the AP gets
too high.
The Load Aware Scan Threshold is
the traffic throughput level an AP
must reach before it stops scanning.
The supported range for this setting
is 0-20000000 bytes/second. (Specify
0 to disable this feature.)
— 1250000
bytes/seco
nd
max-tx-power
Maximum effective isotropic radiated
power (EIRP) from 3 to 33 dBm in 3
dBm increments. You may also
specify a special value of 127 dBm for
regulatory maximum to disable
power adjustments for environments
such as outdoor mesh links. This
value takes into account both radio
transmit power and antenna gain.
Higher power level settings may be
constrained by local regulatory
requirements and AP capabilities.
3, 6, 9, 12, 15,
18, 21, 24, 27,
30, 33, 127
127 dBm