Users Guide

741 | rf arm-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
client-aware
If the Client Aware option is enabled,
the AP does not change channels if
there is active client traffic on that AP.
If Client Aware is disabled, the AP
may change to a more optimal
channel, but this change may also
disrupt current client traffic.
— enabled
client match
The client match feature helps
optimize network resources by
balancing clients across channels,
regardless of whether the AP or the
controller is responding to the
wireless client’s probe requests.
If enabled, the controller compares
whether or not an AP has more
clients than its neighboring APs on
other channels. If an AP’s client load
is at or over a predetermined
threshold as compared to its
immediate neighbors, or if a
neighboring Dell AP on another
channel does not have any clients,
load balancing will be enabled on that
AP. This feature is enabled by default
— enabled
clone
Name of an existing ARM profile from
which parameter values are copied.
— —
cm-band-a-min-signal <cm-
band-a-min-signal>
Minimum signal level required for the
targeted A band radio in a Client
Match band steer move (-dBm).
— 75
cm-band-g-max-signal <cm-
band-g-max-signal>
Maximum signal level of the G band
radio that can trigger a Client Match
band steer move (-dBm)
— 45
cm-dot11v
Client Match steers using 802.11v
BSS Transition Management.
— enabled
cm-lb-client-thresh
<#-of-clients>
If an APradio has fewer clients than
the client match load balancing
threshold defined by this parameter,
the AP will not participate in load
balancing.
0-100 clients 30