Users Guide

P-
a-
r-
a-
m-
e-
t-
e-
r
Description
R-
a-
n-
g-
e
l
o
n
g
i
t
u
d
e
Longitude coordinates of the AP. Use the DMS format.
For example: 122 02 00 W
—
m
a
s
t
e
r
Name or IP address of the master controller. —
m
e
s
h
-
r
o
l
e
Configure the AP to operate as a mesh node. You assign one of three roles: mesh portal, mesh point or
remote mesh point. If you select “none,” the AP operates as a thin AP.
—
m
e
s
h
-
s
a
e
Enable or disable Simultaneous Authentication of Equals (SAE) on a mesh network. This option offers
enhanced security over the default wpa2-psk-aes mesh security setting, and provides secure, attack-
resistant authentication using a pre-shared key. SAE supports simultaneous initiation of a key exchange,
allowing either party to initiate an exchange or both parties to initiate a key exchange simultaneously
To use the SAE feature, you must enable this parameter on all mesh nodes (points and portals) in the
network, to prevent mesh link connectivity issues.
NOTE: This is a Beta feature only. This parameter should be kept “disabled” for this release.
—
n
e
t
m
a
s
k
Netmask for the IP address. —
Dell Networking W-Series ArubaOS 6.4.x | User Guide provision-ap | 712