Users Guide

679 | pan-options Dell Networking W-Series ArubaOS 6.4.x| User Guide
(host) (Configure Palo Alto Network options)# portal 192.0.2.3 cert MyServerCert
Next, create a policy-based routing access control list (ACL) and apply that ACL to all the roles that need
redirection. Best practices is to define a default rule at the end of the policy-based routing ACL that redirects all
non-corporate traffic to the PAN firewalls in the predefined next-hop list.
If you use the predefined nexthop list pan-gp-ipsec-map-list in your policy-based routing ACL, multiple
branch controllers can use the same ACL configuration.
(host) (config)# ip access-list route my_PBR_policy
(host) (config-route-my_PBR_policy)# any network 192.0.2.0 255.255.255.0 any forward
(host) (config-route-my_PBR_policy)# any any any route nexthop-list pan-gp-ipsec-map-list
Related Commands
Modification
ip nexthop-list
Define a nexthop list for policy-based routing.
pan active-profile
This command selects an active Palo Alto Network (PAN)profile from a set of
profiles.
pan profile
This command configures a Palo Alto Networks (PAN) profile to allow a
controller to communicate with a PANfirewall.
show pan-gp
This command displays Palo Alto Networks portal or gateway settings on a
branch or local controller.
show pan-options
This command displays configured options to integrate a branch with a Palo
Alto Networks (PAN) firewall.
uplink
Manage and configure the uplink network connection on W-600 Series or W-
7000 Series controllers.
Command History
Modification
ArubaOS 6.4.3.0 Command introduced.
Command Information
Platforms Licensing Command Mode
W-7000 Series controllers,
when configured as a
branch controller, or any
controller model when
used in conjunction with
uplink manager feature.
Base operating system Config mode on master or local
controllers