Users Guide

647 | mgmt-user Dell Networking W-Series ArubaOS 6.4.x| User Guide
mgmt-user
mgmt-user <username> <role> <password>
mgmt-user localauth-disable
mgmt-user ssh-pubkey client-cert <certificate> <username>
<role> <rcp>
mgmt-user webui-cacert <certificate_name> serial <number> <username> <role>
Description
This command configures an administrative user.
Syntax
Parameter Description Default
<username>
Name of the user.
You can create a maximum of 10 management users.
NOTE: If you configure a root management user, you can use
special characters except for double-byte characters.
—
<role>
Role assigned to the user. Predefined roles include:
l guest-provisioning: Allows the user to create guest
accounts on a special WebUI page.
l location-api-mgmt: Permits access to location API
information. You can log into the CLI; however, you cannot
use any CLI commands.
l network-operations: Permits access to Monitoring,
Reports, and Events pages in the WebUI. You can log into
the CLI; however, you can only use a subset of CLI
commands to monitor the controller.
l read-only: Permits access to CLI show commands or
WebUI monitoring pages only.
l root: Permits access to all management functions on the
controller.
—
<password>
NOTE: You are prompted for the <password> for this user
after you type in <role> and press Enter.
The password must have a minimum of six characters.
You can use special characters in the management user
password. The restrictions are as follows:
l You cannot use double-byte characters
l You cannot use the question mark (?)
l You cannot use white space <space >
—
localauth-disable
Disables authentication of management users based on the
results returned by the authentication server.
To cancel this setting, use the no form of the command:
no mgmt-user localauth-disable
Enabled