Users Guide

Parameter Description
tag-enable
If enabled, tag messages will be sent to the management server.
uccmonitoring-enable
If enabled, the messages about the unified communications manager will
be sent to the management server.
voiceinfo-enable
If enabled, the voice call records will be sent to the management server.
Usage Guidelines
Use this command to create a new management server profile on the controller or to edit the default profiles.
If you delete a management server profile that is applied to a destination server, you must re-apply a different profile
to the server or re-create the same profile for the message filtering process to continue.
Example
The following command configures a management server profile:
(host) (config) #mgmt-server profile AMP-profile
(host) (Mgmt Config profile "AMP-profile") #location-enable
(host) (Mgmt Config profile "AMP-profile") #voiceinfo-enable
Command History
Modification
ArubaOS 6.3.1 Command introduced.
ArubaOS 6.4 The uccmonitoring-enable and airgroup-enable parameters were
introduced.
Command Information
Platforms Licensing Command Mode
All platforms Config mode on master controllers
Dell Networking W-Series ArubaOS 6.4.x | User Guide mgmt-server profile | 644