Users Guide

635 | mac-address-table Dell Networking W-Series ArubaOS 6.4.x| User Guide
mac-address-table
mac-address-table static <macaddr> {fastethernet|gigabitethernet} <slot>/<port> vlan <vlan>
Description
This command adds a static entry to the MAC address table.
Syntax
Parameter Description Range
<macaddr>
Media Access Control (MAC) address, in the format
xx:xx:xx:xx:xx:xx.
—
<slot>
<slot> is always 1. —
<port>
Number assigned to the network interface embedded in the
controller. Port numbers start at 0 from the left-most position.
vlan
ID number of the VLAN. 1-4094
Usage Guidelines
The MAC address table is used to forward traffic between ports on the controller. The table includes addresses
learned by the controller. This command allows you to manually enter static addresses that are bound to
specific ports and VLANs.
Example
The following command configures a MAC address table entry:
(host) (config) #mac-address-table static 00:0b:86:f0:05:60 fastethernet 1/12 vlan 22
Command History
Available in ArubaOS 3.0
Command Information
Platform License Command Mode
Available on all
platforms
Available in the base
operating system
Config mode on master and local controllers