Users Guide

Parameter Description Range Default
You can configure a
“global” NAS IP
address that the
controller uses for
communications with
all RADIUS servers. If
you do not configure
a server-specific NAS
IP, the global NAS IP
is used. To set the
global NAS IP, enter
the ip radius nas-ip
<ipaddr> command.
nas-ip6 <ipv6-address>
NAS IPv6 address to
send in RADIUS
packets.
You can configure a
“global” NAS IPv6
address that the
controller uses for
communications with
all RADIUS servers. If
you do not configure
a server-specific NAS
IPv6, the global NAS
IPv6 is used. To set
the global NAS IPv6,
enter the ipv6
radius nas-ip6
<ipv6-address>
command.
no
Negates any
configured
parameter.
— —
radsec-client-cert <radsec-client-cert>
Configures a RadSec
client certificate on
the RADIUSserver to
identify and
authenticate clients.
— —
radsec-port <radsec-port>
Designates a RadSec
port for RADIUSdata
transport.
1-
65535
2083
radsec-trusted-cacert-name <radsec-trusted-ca>
Designates a
Certificate Authority
to sign RadSec
certificates.
— —
radsec-trusted-servercert-name <radsec-trusted-
ca>
Designates a trusted
RadSec server cer-
tificate.
— —
Dell Networking W-Series ArubaOS 6.4.x | User Guide aaa authentication-server radius | 60