Users Guide

6 | The ArubaOS Command-Line Interface Dell Networking W-Series ArubaOS 6.4.x| User Guide
Command Description
interface port-channel The description parameter is introduced.
interface tunnel l The tunnel interface limit is changed from 2147483647 to
16777215.
l The <remote-node-master-ip> option is introduced as part of the
tunnel destination parameter.
l The <cisco> option is introduced as part of the tunnel keepalive
parameter.
interface vlan l The access-group <name> parameter is introduced to associate
the interface with an ACL.
l For the option-82 parameter, the ap-name [essid] sub-
parameter is introduced.
ip route
The <nexthop> [<cost>] parameters is introduced, which supports
routing using a next-hop list.
show aaa authentication-
server radius
The following parameters are introduced:
l enable-radsec
l radsec-client-cert-name
l radsec-port
l radsec-trusted-cacert-name
l radsec-trusted-servercert-name
show aaa debug The following parameters are introduced:
l age
l role
The dev-id-cache sub-parameter is moved under the age parameter.
show ap active The Q flag is introduced in the output of this command.
show ap arm client-match
history
The following parameters are introduced as part of this command
output:
l Station
l Status/Roam Time/Mode
l Signal
l Band
l Radio BSSID
l AP Name
Additionally, the advanced parameter is introduced.
show ap arm client-match
summary
The following parameters are introduced as part of this command
output: