Users Guide

591 | local-factory-cert Dell Networking W-Series ArubaOS 6.4.x| User Guide
local-factory-cert
local-factory-cert local-mac <lmac>
Description
This command configures the factory-installed certificate for secure communication between a local controller
and a master controller.
Syntax
Parameter Description
<lmac>
MAC address of the local controller’s factory-installed certificate.
Usage Guidelines
Use this command on a master controller to configure the factory certificate for communication with a local
controller. On the local controller, use the masterip command to configure the IP address and certificates for
the master controller. If your master and local controllers use certificates for authentication, the IPsec tunnel
will be created using IKEv2.
Example
The following command configures the local controller with a factory-installed certificate:
(host) (config) #local-factory-cert local-mac 00:16:CF:AF:3E:E1
Related Commands
Command Description Mode
show local-cert-
mac
Display the IP, MAC address and certificate
configuration of local controllers in a master-local
configuration
Config mode on master
controllers.
Command History
Introduced in ArubaOS 6.1
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating
system
Config mode on master controllers