Users Guide

523 | ip igmp Dell Networking W-Series ArubaOS 6.4.x| User Guide
ip igmp
ip igmp
last-member-query-count <number>
last-member-query-interval <seconds>
max-members-per-group <val>
query-interval <seconds>
query-response-interval <.1 seconds>
quick-client-convergence
robustness-variable <2-10>
ssm-range
startup-query-count <number>
startup-query-interval <seconds>
version-1-router-present-timeout <seconds>
Description
This command configures Internet Group Management Protocol (IGMP) timers and counters.
Syntax
Parameter Description Range Default
last-member-query-count
Number of group-specific queries that
the controller sends before assuming
that there are no local group members.
1-
65535
2
last-member-query-interval
Maximum time, in seconds, that can
elapse between group-specific query
messages.
1-
65535
second
s
10
seconds
max-members-per-group
Configure maximum members per
group.
1-
65535
300
query-interval
Interval, in seconds, at which the
controller sends host-query messages
to the multicast group address
224.0.0.1 to solicit group membership
information.
1-
65535
second
s
125
seconds
query-response-interval
Maximum time, in 1/10th seconds, that
can elapse between when the
controller sends a host-query message
and when it receives a response. This
must be less than the query-interval.
1-
65535
second
s
100 (10
second
s)
quick-client-convergence
Trigger IGMP reports from client
during roaming.
— —
robustness-variable
Increase this value to allow for
expected packet loss on a subnetwork.
2-10 2
ssm-range
Configure the start IP address and mask
IP address for ssm-range.
— —