Users Guide

4 | The ArubaOS Command-Line Interface Dell Networking W-Series ArubaOS 6.4.x| User Guide
Command Description
routing-policy-map This command associates a routing access control list (ACL) with a
user role.
show ap debug radar-logs Displays the latest four RADAR event logs from the AP.
show ap debug radio-info Displays the Wi-Fi radio debug logs from the AP driver.
show auth-survivability This command displays the auth-survivability parameters that are
configured in the local controller.
show branch Shows configuration and DHCP address settings on a branch
controller.
show branch-config-group The output of this command shows configuration settings for a
branch config group.
show branch-dhcp-pool The output of this command shows a summary of DHCP pool
information for branch controllers.
show ip nexthop-list Display nexthop list settings for policy-based routing.
show local-userdb-branch The output of this command lists the MAC address and assigned
branch config group for branch controllers associated with that
master.
show log arm-user-debug This command displays a user's ARM debug logs.
show pan-gp This command displays Palo Alto Networks portal or gateway settings
on a branch or local controller.
show pan-options This command displays configured options to integrate a branch
controller with a Palo Alto Networks (PAN) firewall.
show wlan anyspot-profile The output of this command displays configuration settings for a
WLAN anyspot profile.
wlan anyspot-profile This command configures the anyspot client probe suppression
feature, which decreases network traffic by suppressing probe
requests from clients attempting to locate and connect to other
known networks.
Modified Commands
The following commands are modified in ArubaOS 6.4.3.0: