Users Guide

Parameter Description
AP.
l client— Clear all wired client related commands. Specify the
MAC address of the client.
l probe — Clear all probe information. Specify the BSSID of the
probe.
Usage Guidelines
The clear command clears the specified parameters of their current values.
Example
The following command clears all aaa counters for all authentication servers:
(host) (config) #clear aaa authentication-server all
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.1 The following MLD parameters are added to the ipv6 option:
l mld group
l mld stats-counters
ArubaOS 6.3 l The device-id-cache, load-balance, multiple-server-accounting
parameters were introduced under aaa parameter.
l The airgroup parameter was introduced.
l The dhcp binding parameter under ipv6 was introduced.
l The proxy-mobilty-group parameter under mld was introduced.
l The ip-fragment-table parameter under datapath was introduced.
ArubaOS 6.4 l The lldp parameter was introduced.
l The Server and User options were introduced under the clear airgroup
command.
ArubaOS 6.4.2.0 l The web-cc cache and web-cc stats parameters were introduced.
l The datapath web-cc parameter was introduced.
ArubaOS 6.4.3.0 l The clear counter tunnel interface limit was changed from
2147483647 to 16777215.
l The global-credits statistics parameter was introduced.
l The port-channel sub-parameter was introduced under the counters
parameter.
Dell Networking W-Series ArubaOS 6.4.x | User Guide clear | 286