Users Guide
Parameter Description
l station {counters}
l tcp {counters}
l tunnel {counters}
l user {counters}
l web-cc {counters}
l wifi-reassembly {counters}
l wmm {counters}
dot1x
Clears all 802.1X specific counters and supplicant statistics. Use the
following parameters:
l counters
l supplicant-info
fault
Clears all SNMP fault configuration.
gap-db
Clears global AP database. This command is often used to clear all
stale AP records. Use the following parameters:
l ap-name
l lms
l wired-mac
ip
Clears all IP information from DHCP bindings, IGMP groups and IP
mobility configuration. Use the following parameters:
l dhcp
l igmp {group|proxy-mobility-group|stats-counters}
l mobile {multicast-vlan-table|traffic|trail}
ipc
Clears all inter process communication statistics.
l statistics {app-ap|app-id|app-name}
ipv6
Clears all IPv6 session statistics, multicast listener discovery (MLD)
group and member information, MLD statistics, counters, and
DHCPv6 binding information. Use the following parameters:
l datapath {session}
l dhcp {binding}
l mld {group|proxy-mobility-group|stats-counters}
l neighbor
lldp
Clears lldp information on all the interfaces. Use the following
parameters:
l neighbors {interface gigabitethernet slot/port}
l statistics {interface gigabitethernet slot/port}
Dell Networking W-Series ArubaOS 6.4.x | User Guide clear | 284