Users Guide

Parameter Description
l service — Clears statistics maintained in the AirGroup service
table.
user
l Mac Address - Clears the AirGroup server Mac addresses.
l dlna - Clears the AirGroup DLNA users.
l mdns - Clears the AirGroup mDNS users.
l all - Removes the current AirGroup user entries from the user
table.
ap
Clear all AP related information.
arm bandwidth-management
Clears AP bandwidth management table counters. An AP can be
specified by ap-name, BSSID, IPv4 address, or IPv6 address.
arm client-match
summary — Clears the client match summary information
unsupported — Clears the MAC address of an unsteerable client or
clients.
crash-info
Clears AP crash information. An AP can be specified by ap-name,
IPv4 address, or IPv6 address.
debug
l bss-dmo-stats— Clears DMO debug statistics from a specific
BSSID of an AP.
l client-stats— Clears statistics from a client.
l dot11r {efficiency-stat}— Clears 802.11r related stats.
l lldp— Clears Link Layer Discovery Protocol.
l radio-stats— Clears aggregate radio debug statistics of an AP.
mesh
Clear all mesh commands.
port
Toggle the link on the specified port.
remote flash-config
Clears the flash configuration from a specified AP. An AP can be
specified by ap-name, BSSID, IPv4 address, or IPv6 address.
arm
Clear the following types of ARM client match information
l client-match-summary
l client-match-unsteerable
arp
Clear all ARP table information. You can either clear all information
or enter the IP address of the ARP entry to clear a specific value.
counters
Clear all interface configuration values.
fastethernet
Clears configuration related to fastethernet ports.
Dell Networking W-Series ArubaOS 6.4.x | User Guide clear | 282