Users Guide

Parameter Description Default
The Secure Enterprise Mesh license must be
installed.
no
Negates any configured parameter. —
regulatory-domain-profile
Configures the country code and valid channels. See
ap regulatory-domain-profile on page 217.
“default”
rf-optimization
-profile
Configures load balancing and coverage hole and
interference detection. See rf optimization-profile on
page 782.
“default”
snmp-profile
Configures SNMP-related parameters. See ap snmp-
profile (deprecated) on page 221.
“default”
virtual-ap
One or more profiles, each of which configures a
specified WLAN. See wlan virtual-ap on page 2341.
“default”
voip-cac-profile
Configures voice over IP (VoIP) call admission control
(CAC) options. See wlan voip-cac-profile on page
2354.
This parameter requires the PEFNG license.
“default”
Usage Guidelines
Profiles that are applied to an AP group can be overridden on a per-AP name basis, and virtual APs can be
added or excluded on a per-AP name basis. If a particular profile is overridden for an AP, all parameters from
the overriding profile are used. There is no merging of individual parameters between the AP and the AP group
to which the AP belongs.
Example
The following command excludes a virtual AP profile from a specific AP:
(host) (config) #ap-name 00:0b:86:c0:cf:d8
exclude-virtual-ap corpnet
Related Commands
View AP settings using the command show ap-name.
Dell Networking W-Series ArubaOS 6.4.x | User Guide ap-name | 258