Users Guide

ap-name
ap-name <name>
ap-system-profile <profile>
authorization-profile <profile>
clone <profile>
dot11a-radio-profile <profile>
dot11a-traffic-mgmt-profile <profile>
dot11g-radio-profile <profile>
dot11g-traffic-mgmt-profile <profile>
enet0-profile <profile>
enet1-profile <profile>
event-thresholds-profile <profile>
exclude-mesh-cluster-profile-ap <profile>
exclude-virtual-ap <profile>
ids-profile <profile>
mesh-cluster-profile <profile> priority <priority>
mesh-radio-profile <profile>
no ...
regulatory-domain-profile <profile>
rf-optimization-profile <profile>
snmp-profile <profile>
virtual-ap <profile>
voip-cac-profile <profile>
Description
This command configures a specific AP.
Syntax
Parameter Description Default
<name>
Name that identifies the AP. By default, an AP’s
name can either be the AP’s Ethernet MAC address,
or if the AP has been previously provisioned with an
earlier version of ArubaOS, a name in the format
<building>.<floor>.<location>. The name must be 1-
63 characters.
NOTE: You cannot use quotes (“) in the
AP name.
—
ap-system-profile
Configures AP administrative operations, such as
logging levels. See ap system-profile on page 226.
“default”
authorization-profile
Restrictive group for unauthorized AP. —
clone
Name of an existing AP name from which profile
names are copied.
—
dot11a-radio-profile
Configures 802.11a radio settings for the AP group;
contains the ARM profile. See rf dot11a-radio-profile
on page 752.
“default”
Dell Networking W-Series ArubaOS 6.4.x | User Guide ap-name | 256