Users Guide

249 | ap-group Dell Networking W-Series ArubaOS 6.4.x| User Guide
ap-group
ap-group <group>
ap-system-profile <profile>
authorization-profile <profile>
clone <profile>
dot11a-radio-profile <profile>
dot11a-traffic-mgmt-profile <profile>
dot11g-radio-profile <profile>
dot11g-traffic-mgmt-profile <profile>
enet0-port-profile <profile>
enet1-port-profile <profile>
enet2-port-profile <profile>
enet3-port-profile <profile>
enet4-port-profile <profile>
event-thresholds-profile <profile>
ids-profile <profile>
mesh-cluster-profile <profile> priority <priority>
mesh-radio-profile <profile>
no ...
regulatory-domain-profile <profile>
rf-optimization-profile <profile>
virtual-ap <profile>
voip-cac-profile <profile>
Description
This command configures an AP group.
Syntax
Parameter Description Range Default
<group>
Name that identifies the AP group. The
name must be 1-63 characters.
NOTE: You cannot use quotes (“) in the AP
group name.
— “default”
ap-system-profile
Configures AP administrative operations,
such as logging levels. See ap system-
profile on page 226.
— “default”
authorization-profile
Restrictive group for unauthorized AP. — —
clone
Name of an existing AP group from which
profile names are copied.
— —
dot11a-radio-profile
Configures 802.11a radio settings and
load balancing for the AP group; contains
the ARM profile. See rf dot11a-radio-
profile on page 752.
— “default”