Users Guide

Usage Guidelines
This command is only applicable to APs with Ethernet ports. Issue this command to enable or disable the wired
port, define an AAA profile for wired port devices, and associate the port with an ethernet link profile that
defines its speed and duplex values.
Example
The following command defines a AAA profile for wired port devices:
(host) (config) #ap wired-port-profile wiredport1
aaa-profile default-open
authentication-timeout 30
wired-ap-profile wiredap1
Command History
Release Modification
ArubaOS 6.0 Command introduced
ArubaOS 6.3 The spanning-tree parameter was added.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system, except
for noted parameters
Config mode on master controllers
Dell Networking W-Series ArubaOS 6.4.x | User Guide ap wired-port-profile | 242