Users Guide

241 | ap wired-port-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
ap wired-port-profile
ap wired-port-profile <profile>
aaa-profile <profile>
authentication-timeout <seconds>
clone
enet-link-profile <profile>
lldp-profile <profile>
no
rap-backup
shutdown
spanning-tree
wired-ap-profile <profile>
Description
This command configures a wired port profile.
Syntax
Parameter Description
aaa-profile <profile>
Name of a AAA profile to be used by devices connecting to the AP’s
wired port.
authentication-timeout
Authentication timeout value, in seconds, for devices connecting the
AP’s wired port. The supported range is 1-65535 seconds, and the
default value is 20 seconds.
clone <profile>
Create a new AP wired port profile based upon the values of an
existing profile.
enet-link-profile <profile>
Specify an Ethernet link profile to be used by devices associated with
this wired port profile. The Ethernet link profile defines the duplex
value and speed to be used by the port.
lldp-profile <profile>
Specify an LLDP profile to be used by devices associated with this wired
port profile. The LLDP profile specifies the type-length-value (TLV) ele-
ments to be sent in LLDP PDUs.
no
Negates any defined parameter
rap-backup
Use the rap-backup parameter to use the wired port on a Remote AP
for local connectivity and troubleshooting when the AP cannot reach
the controller. If the AP is not connected to the controller, no firewall
policies will be applied when this option is enabled. (The AAA profile
will be applied when the AP is connected to controller).
shutdown
Disable the wired AP port.
spanning-tree
Enables the spanning-tree protocol.
wired-ap-profile <profile>
Name of a wired AP profile to be used by devices connecting the AP’s
wired port. The wired AP profile defines the forwarding mode and
switchport values used by the port.