Users Guide

wms client
wms client <macaddr> mode {manually-contain|interfering|valid}
Description
This command allows you to classify a wireless client into one of several categories.
Syntax
Parameter Description
client
MAC address of the client.
mode
Classify the client into one of the following categories:
manually-contain
Manualy enable denial of service to this client.
interfering
Setting the client mode to interfering makes it part of clients outside the
enterprise
valid
A client that is part of the enterprise.
Usage Guidelines
ArubaOS can automatically determine client classification based on client behavior, but this command allows
you to explicitly classify a client. The classification of a client is used in certain policy enforcement features. For
example, if protect-valid-sta is enabled in the IDS Unauthorized Device Profile, then clients that are classified
as valid cannot connect to non-valid APs.
Example
The following command classifies a client as valid:
(host) #wms client 00:00:A4:34:C9:B3 mode valid
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.1
The following parameters were deprecated
dos
neighbor
The following parameters were introduced:
manually-contain
interfering
Dell Networking W-Series ArubaOS 6.4.x | User Guide wms client | 2362