Users Guide

2351 | wlan virtual-ap Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
feature in these versions of
ArubaOS functions the same
way as the default prefer-
5GHz steering mode
available in ArubaOS 6.0 and
later.
strict-compli
ance
If enabled, the AP denies
client association requests
if the AP and client station
have no common rates
defined. Some legacy client
stations which are not fully
802.11-compliant may not
include their configured
rates in their association
requests. Such non-
compliant stations may
have difficulty associating
with APs unless strict
compliance is disabled.
— disabled
vap-enable
Enable or disable the virtual
AP.
— enabled
vlan
The VLAN(s) into which
users are placed in order to
obtain an IP address. Enter
VLANs as a comma-
separated list of existing
VLAN IDs or VLAN names. A
mixture of names and
numeric IDs are not
allowed.
NOTE: You must add an
existing VLAN ID to the
Virtual AP profile.
1
vlan-mobility
VLAN mobility retains the
client VLAN on roaming
irrespective of the VAP
VLAN, provided the user
VLANs are extended.
VLAN mobility and mobile IP
are mutually exclusive.
VLAN mobility does not re-
use user firewall sessions
on roaming as the sessions
will have to be recreated
locally on the roamed
controller.
— disabled
wan-operation
Specify the wan-operation
to enable Virtual AP
depending on the state of
the WAN link.
always/
backup/
primary
always