Users Guide

2349 | wlan virtual-ap Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
multi-association
Enables or disables multi-
association for this virtual
AP. When enabled, this
feature allows a station to
be associated to multiple
APs. If this feature is
disabled, when a station
moves to new AP it will be
de authorized by the AP to
which it was previously
connected, deleting station
context and flushing key
caching information.
— disabled
no
Negates any configured
parameter.
— —
outer-vlan
List of VLANs that can be
used for QinQ outer vlan in
this virtual AP.
— —
preserve-vlan
This parameter allows
clients to retain their
previous VLAN assignment
if the client disassociates
from an AP and then
immediately re-associates
either with same AP or
another AP on same
controller.
rap-operation
Configures when the virtual
AP operates on a remote
AP:
l always—Permanently
enables the virtual AP
(Bridge Mode only). This
option can be used for
non-802.1X bridge VAPs.
l backup—Enables the
virtual AP if the remote
AP cannot connect to
the controller (Bridge
Mode only). This option
can be used for non-
802.1X bridge VAPs.
l persistent—
Permanently enables
the virtual AP after the
remote AP initially
connects to the
controller (Bridge Mode
only). This option can be
used for any
(Open/PSK/802.1X)
bridge VAPs.
always/
backup/
persistent/
standard
standard