Users Guide

2345 | wlan virtual-ap Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
clone
Name of an existing traffic
management profile from
which parameter values
are copied.
— —
deny-inter-user-traffic
Select this checkbox to
deny traffic between the
clients using this virtual AP
profile.
The firewall comand
includes an option to deny
all inter-user traffic,
regardless of the Virtual AP
profile used by those
clients.
If the global setting to deny
inter-user traffic is enabled,
all inter-user traffic
between clients will be
denied, regardless of the
settings configured in the
virtual AP profiles. If the
setting to deny inter-user
traffic is disabled globally
but enabled on an
individual virtual ap, only
the traffic between un-
trusted users and the
clients on that particular
virtual AP will be blocked.
— disabled
deny-time-range
Specify the name of the
time range for which the AP
will deny access. Time
ranges can be defined
using the CLI command
time-range.
— —
dos-prevention
If enabled, APs ignore
deauthentication frames
from clients. This prevents
a successful deauth attack
from being carried out
against the AP. This does
not affect third-party APs.
— disabled
dot11k-profile
Name of an 802.11k profile
to be associated with this
VAP.
— default
dynamic-mcast-optimization
Enable/Disable dynamic
multicast optimization. This
parameter can only be
enabled on a controller with
a PEFNG license.
— disabled