Users Guide

Parameter Description Range Default
request-retry-
interval
Interval, in seconds, between
the first and second retries of
AP-generated requests. If the
configured interval is less than
30 seconds, the interval for
subsequent retries is
increased up to 30 seconds.
1-65535 10 seconds
rf-band
For APs that support both a
and b/g RF bands, RF band in
which the AP should operate:
l g = 2.4 GHz
l a = 5 GHz
a/g g
rtls-server
Enables the AP to send RFID
tag information to an RTLS
server.
— —
ip-or-dns
IP address or the DNS of the
RTLS server to which location
reports are sent.
— —
port
Port number on the server to
which location reports are
sent.
— —
key
Shared secret key. — —
station-message-frequency
Indicates how often packets
are sent to the server.
1-3600 30 seconds
include-unassoc-sta
RTLS station reporting includes
information for APs and the cli-
ents that the AP has detected. If
you include theinclude-unas-
soc-sta parameter, the station
reports will also include inform-
ation about clients not associated
to any AP. By default, unas-
sociated clients are not included
in station reports.
— disabled
session-acl
Session ACL configured with
the ip access-list session
command.
NOTE: This parameter requires
the PEFNG license.
— —
shell-passwd
Sets a username and
password for the AP console.
—
1500 bytes
spanning-tree
Enables the spanning-tree pro-
tocol.
—
disabled
Dell Networking W-Series ArubaOS 6.4.x | User Guide ap system-profile | 234