Users Guide

2339 | wlan tsm-req-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description Range Default
measure-duration <measure-duration>
This parameter is used to set the
Measurement Duration field in the
Transmit Stream/Category
Measurement Request frame. The
Measurement Duration is set to the
duration of the requested
measurement. It is expressed in
units of TUs. When the request mode
for the Transmit Stream/Category
Measurement Request frame is set
to "triggered", the Measurement
Duration field should be set to 0.
0-
65535
9776
no
Negates any configured parameter — —
num-repeats <num-repeats>
This parameter is used to set the
"Number of Repetitions" field in the
Transmit Stream/Category
Measurement Request frame. The
Number of Repetitions field contains
the requested number of repetitions
for all the Measurement Request
elements in this frame. A value of
zero in the Number of Repetitions
field indicates Measurement
Request elements are executed once
without repetition. A value of 65535
in the Number of Repetitions field
indicates Measurement Request
elements are repeated until the
measurement is cancelled or
superseded.
0-
65535
65535
random-interval <random-interval>
This parameter is used to set the
Randomization Interval field in the
Transmit Stream/Category
Measurement Request frame. The
Randomization Interval is used to
specify the desired maximum
random delay in the measurement
start time. It is expressed in units of
TUs (Time Units). When the request
mode for the Transmit
Stream/Category Measurement
Request frame is set to "triggered",
the Randomization Interval is not
used and is set to 0. A
Randomization Interval of 0 in a
measurement request indicates that
no random delay is to be used.
0-
65535
0
request-mode {normal | triggered}
This parameter is used to determine
the request mode for the Transmit
Stream/Category Measurement
Request frame. There are two
options for this field:
l normal
—
normal