Users Guide

Example
The following command configures an SSID for WPA2 AES authentication:
(host) (config) #wlan ssid-profile corpnet
essid Corpnet
opmode wpa2-aes
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.2 The wmm-ts-min-inact-int parameter was introduced. The wpa2-
preauth parameter was removed,
ArubaOS 3.3 Support for the high-throughput IEEE 802.11n standard was introduced
including the ht-ssid-profile parameter and various rate changes.
ArubaOS 3.3.1 Support for configurable WMM AC mapping was introduced including the
wmm-be-dscp, wmm-bk-dscp, wmm-vi-dscp, and wmm-vo-dscp
parameters.
ArubaOS 3.4 The deny-bcast and disable-probe-retry parameters were introduced.
The drop-mcast parameter was deprecated.
ArubaOS 3.4.1 License requirements changed in ArubaOS 3.4.1, so the command required
the PEF license instead of the Voice Services Module license required in
earlier versions.
ArubaOS 6.1 The opmode options wpa2-aes-gcm-128 and wpa2-aes-gcm-256 were
introduced. These parameters require the ACR license.
The qbss-load-enable option is included.
ArubaOS 6.1.4.1 The advertise-ap-name parameter was added.
ArubaOS 6.2
The advertise-location and enforce-user-vlan parameters were added.
ArubaOS 6.3 l The dot11r-profile parameter was added.
l The opmode bSec 256 parameter was added.
ArubaOS 6.4 l The mfp-capable and mfp-required parameters were added.
l The eapol-rate-opt parameter was enabled by default.
ArubaOS 6.4.2.0 The description of the multicast-rate parameter is changed to denote the
rate for video multicast frames.
Dell Networking W-Series ArubaOS 6.4.x | User Guide wlan ssid-profile | 2332