Users Guide

Description Range Default
ssid-enable
Enables/disables this SSID. — enabled
strict-svp
Enable Strict Spectralink Voice Protocol
(SVP)
— disabled
wepkey1 - wepkey4
Static WEP key associated with the key
index. Can be 10 or 26 hex characters
in length.
— —
weptxkey
Key index that specifies which static
WEP key is to be used. Can be 1, 2, 3,
or 4.
1, 2, 3, 4 1
wmm
Enables or disables WMM, also known
as IEEE 802.11e Enhanced Distribution
Coordination Function (EDCF). WMM
provides prioritization of specific traffic
relative to other traffic in the network.
— disabled
wmm-be-dscp
DSCP value used to map WMM best-
effort traffic.
0-63 —
wmm-bk-dscp
DSCP used to map WMM background
traffic.
0-63 —
wmm-override-dscp-mapping
Overrides the default DSCP mappings
in the SSID profile with the ToS value.
This setting is useful when you want to
set a non-default ToS value for a
specific traffic.
— disabled
wmm-ts-min-in
act-int
Specifies the minimum inactivity time-
out threshold of WMM traffic. This
setting is useful in environments
where low inactivity interval time-outs
are advertised, which may cause
unwanted timeouts.
0-3,600,000 0
millisecond
s
wmm-uapsd
Enable Wireless Multimedia (WMM)
UAPSD powersave.
— enabled
wmm-vi-dscp
DSCP used to map WMM video traffic. 0-63 —
wmm-vo-dscp
DSCP used to map WMM voice traffic. 0-63 —
wpa-hexkey
WPA pre-shared key (PSK). — —
wpa-passphrase
WPA passphrase with which to
generate a pre-shared key (PSK).
— —
Dell Networking W-Series ArubaOS 6.4.x | User Guide wlan ssid-profile | 2330