Users Guide

2327 | wlan ssid-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Description Range Default
max-retries
Maximum number of retries allowed
for the AP to send a frame.
0-15 4
max-tx-fail
The AP assumes the client has left and
should be deauthorized when the AP
detects this number of consecutive
frames were not delivered because
the max-retries threshold was
exceeded.
0 -
2,147,483,64
7
0
mcast-rate-opt
Enables or disables scanning of all
active stations currently associated to
an AP to select the lowest transmission
rate for broadcast and multicast
frames. This option only applies to
broadcast and multicast data frames;
802.11 management frames are
transmitted at the lowest configured
rate.
NOTE: Do not enable this parameter
unless instructed to do so by your Dell
technical support representative.
— disabled
mfp-capable
When enabled, the SSID supports man-
agement frame protection (MFP) capable
clients and traditional clients.
— disabled
mfp-required
When enabled, the SSID only supports
MFPcapable clients.
— disabled
multicast-rate
When configured, chooses the rate for
video multicast frames.
default, 6, 9,
12, 18, 24, 36,
48, 54 Mbps
default
no
Negates any configured parameter. — —
opmode
The layer-2 authentication and
encryption to be used on this ESSID to
protect access and ensure the privacy
of the data transmitted to and from the
network.
—
opensyste
m
bSec-128
WPA2 with AES GCM-128 encryption
and dynamic keys using 802.1X
— —
bSec-256
WPA2 with AES GCM-256 encryption
and dynamic keys using 802.1X
— —
dynamic-wep
WEP with dynamic keys. — —
opensystem
No authentication and encryption. — —
static-wep
WEP with static keys. — —