Users Guide

2325 | wlan ssid-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
Description Range Default
battery-boost
Converts multicast traffic to unicast
before delivery to the client, thus
allowing you to set a longer DTIM
interval. The longer interval keeps
associated wireless clients from
activating their radios for multicast
indication and delivery, leaving them in
power-save mode longer and thus
lengthening battery life.
NOTE: This parameter requires the
PEFNG license. This parameter should
not be enabled if you plan on using the
Push-To-Talk feature for Polycom
SpectraLink devices.
— disabled
clone
Name of an existing SSID profile from
which parameter values are copied.
— —
deny-bcast
When a client sends a broadcast probe
request frame to search for all
available SSIDs, this option controls
whether or not the system responds
for this SSID. When enabled, no
response is sent and clients have to
know the SSID in order to associate to
the SSID. When disabled, a probe
response frame is sent for this SSID.
— disabled
disable-probe-retry
Enable or disable battery MAC level
retries for probe response frames. By
default this parameter is enabled,
which mean that MAC level retries for
probe response frames is disabled.
Enabled
dot11r-profile
Associates the dot11r-profile with the
SSID profile.
— —
dtim-period
Specifies the interval, in milliseconds,
between the sending of Delivery
Traffic Indication Messages (DTIMs) in
the beacon. This is the maximum
number of beacon cycles before
unacknowledged network broadcasts
are flushed. When using wireless
clients that employ power
management features to sleep, the
client must revive at least once during
the DTIM period to receive broadcasts.
1
eapol-rate-opt
Use a more conservative rate for more
reliable delivery of EAPOL frames.
— enabled
edca-parameters
-profile
Name of the enhanced distributed
channel access (EDCA) profile that
applies to this SSID.
NOTE: This parameter requires the
— —