Users Guide

Syntax
Description Range Default
<profile-name>
Name of this instance of the profile.
The name must be 1-63 characters.
— “default”
902il-compatibility-mode
(For clients using NTT DoCoMo 902iL
phones only) When enabled, the
controller does not drop packets from
the client if a small or old initialization
vector value is received. (When TKIP or
AES is used for encryption and TSPEC
is enabled, the phone resets the value
of the initialization vector after
add/delete TSPEC.)
NOTE: This parameter requires the
PEFNG license.
— disabled
a-basic-rates
List of supported 802.11a rates, in
Mbps, that are advertised in beacon
frames and probe responses.
6, 9, 12, 18,
24, 36, 48, 54
Mbps
6, 12, 24
Mbps
a-beacon-rate
Sets the beacon rate for 802.11a (use
for Distributed Antenna System (DAS)
only). Using this parameter in normal
operation may cause connectivity
problems.
default, 6, 9,
12,
18,24,36,48,
54 Mbps
minimum
valid rate
a-tx-rates
Set of 802.11a rates at which the AP is
allowed to send data. The actual
transmit rate depends on what the
client is able to handle, based on
information sent at the time of
association and on the current
error/loss rate of the client.
6, 9, 12, 18,
24, 36, 48, 54
Mbps
6, 9, 12, 18,
24, 36, 48,
54 Mbps
advertise-ap-name
If enabled, APs that are part of this VAP
willbroadcast the AP Name information in
the beacons frames.
— —
advertise-location
If enabled, APs that are part of this VAP
will broadcast their GPS coordinates in
the beacons and probe response frames
as part of a vendor-specific Information
Element.
— disabled
ageout
Time, in seconds, that a client is
allowed to remain idle before being
aged out.
1000
seconds
Dell Networking W-Series ArubaOS 6.4.x | User Guide wlan ssid-profile | 2324